Temperature and humidity aging of poly(p-phenylene-2,6-benzobisoxazole) fibers: Chemical and physical characterization

In recent years, poly(p-phenylene-2,6-benzobisoxazole) (PBO) fibers have become prominent in high strength applications such as body armor, ropes and cables, and recreational equipment. The objectives of this study were to expose woven PBO body armor panels to elevated temperature and moisture, and to analyze the chemical, morphological and mechanical changes in PBO yarns extracted from the panels. A 30% decrease in yarn tensile strength, which was correlated to changes in the infrared peak absorbance of key functional groups in the PBO structure, was observed during the 26 week elevated temperature/elevated moisture aging period. Substantial changes in chemical structure were observed via infrared spectroscopy, as well as changes in polymer morphology using microscopy and neutron scattering. When the panels were removed to an ultra-dry environment for storage for 47 weeks, no further decreases in tensile strength degradation were observed. In a follow-on study, fibers were sealed in argon-filled glass tubes and exposed to elevated temperature; less than a 4% decrease in tensile strength was observed after 30 weeks, demonstrating that moisture is a key factor in the degradation of these fibers.     

Synthesis and inhibitory activity of alkyl(hydroxyaryl)amines

The reaction of ω-(4-hydroxyaryl)haloalkanes with various nitrogen-containing agents afforded primary, secondary, and tertiary amino derivatives of 2,6-dialkylphenols. For the compounds synthesized, the reaction rate constants with peroxide radicals were measured for cumene and methyl oleate oxidation. The total inhibitory activity in the model reactions of thermal autooxidation of lard and hexadecane was studied. The rate constants of alkyl(hydroxylaryl)amines are the same as those of the corresponding alkylphenols, whereas the total inhibitory activity of some alkyl(hydroxylaryl)amines exceeds substantially that for alkylphenols. Dedicated to the memory of Academician N. N. Vorozhtsov on the 100th anniversary of his birth. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1107–1112, June, 2007.     

Studies of surface properties of Na- and La-montmorillonites

This paper presents possible applications of thermal analysis, sorptometry and porosimetry to study physico-chemical properties of Na- and La-montmorillonite samples, especially for determination of total surface heterogeneity. The quasi-isothermal thermogravimetric (Q-TG) mass loss and its first derivative (Q-DTG) curves with respect to temperature and time obtained during programmed liquid thermodesorption under quasi-isothermal conditions have been used to study adsorbed layers and heterogeneous properties of the Na- and La-montmorillonites. Calculations of the desorption energy distribution functions by analytical procedure using mass loss Q-TG and differential mass loss Q-DTG curves of thermodesorption under quasi-isothermal conditions of polar and non-polar liquid vapours preadsorbed on a material surface are presented. Parameters relating to porosity of samples were determined by sorptometry, mercury porosimetry and atomic force microscopy (AFM). From nitrogen sorption isotherms from sorptometry and porosimetry methods, the fractal dimensions of montmorillonites have been calculated. Moreover, a new approach is proposed to calculate fractal dimensions of materials obtained from Q-TG curve; this is compared with values obtained by the above methods. The total heterogeneous properties (energy distribution function and pore-size distribution functions) of samples studied were estimated. The radius and pore volume of the tested samples calculated on the basis of thermogravimetry, sorptometry and porosimetry techniques were compared and good correlations obtained.     

Cooled internal reflection element for infrared chemical sensing of volatile to semi-volatile organic compounds in the headspace of aqueous solutions

In this study, the cooling effect was applied to an evanescent wave type infrared (IR) chemical sensing method to effectively trap volatile organic compounds (VOCs), which have been absorbed in the hydrophobic film coated around the internal reflection element (IRE). The detection of VOCs in aqueous solutions was taken in the headspace of the aqueous solution. This method eliminates the long-term instability of hydrophobic film soaked in an aqueous solution and the potential spectral interference caused by the matrix of the aqueous solution. Thermal energy has been applied to the aqueous solution to assist in the evaporation of VOCs out of the aqueous matrix. By applying a cooling system to the IRE, the excess thermal energy can be removed leading to more stable IR signals. After examination of organic compounds with vapour pressure (P_v) ranging from 0.017 to 150 Torr, significant differences were found between IR signals from cooled and un-cooled systems. Because the thermal conductivity of the IRE used in IR detection is typically low; the efficiency in removing the thermal energy is limited. By heating the aqueous solutions to different temperatures, the IR signals showed that the sample temperature was limited to around 80 °C. The IR signal determination results for five different volatility organic compounds indicated that the optimal heating temperature was not necessary to match with the volatilities of organic compounds in cooling system. The linear regression coefficient (R²) of the standard curve for sample concentrations in the range 5-200 μg ml⁻¹ was generally higher than 0.991 and the detection limit was around a few hundred ng ml⁻¹, which was two to three times lower than that of un-cooled system.     

Study of spectral analytical data using fingerprints and scaled similarity measurements

A new chemoinformatic model has been developed for enlarging the differences between spectra and applied to differentiation of wines according to the criteria grape origin and variety and ageing process. The model is based on generation of fingerprints from normalised spectra, using empirical parameters and a set of 120 samples. After generation of the fingerprints, similarity matrixes were built on the basis of the Tanimoto similarity index between the fingerprints of the samples. Calculation of the Tanimoto index was modified to adapt the index to the characteristics of the analytical measurements. Thus, scaling factors taking into account pattern fingerprints generated from a group of samples with common characteristics were used. In addition, a modified expression for calculating the Tanimoto index was employed. Principal-components analysis (PCA) and soft independent modelling of class analogy (SIMCA) were applied to the similarity matrixes. The results obtained are discussed as a function of the normalisation method employed, the empirical factor used in generation of the fingerprints, and selection of samples for building the pattern fingerprint, etc. Finally, results from differentiation of wines are compared with those obtained by applying PCA to the unprocessed spectra as stated by the proposed model.     

Total Synthesis of Sialylated Glycans Related to Avian and Human Influenza Virus Infection

Human and avian influenza type A viruses bind sialylated pentasaccharides. Herein, the total synthesis of four of these glycans is reported. Efficient sialylations relied on two N‐Troc‐protected (Troc=2,2,2‐trichloroethoxycarbonyl) sialic acid building blocks. The first, a thiophenyl glycoside, readily produced the sialyl‐α(2‐6)galactose disaccharide. Combination of the second building block, a novel glycosyl phosphite, and a benzylidene‐protected galactoside produced the best results for the formation of the sialyl‐α(2‐3)galactose. Two common trisaccharides were assembled by the introduction of glucose, galactose, and glucosamine building blocks followed by selective deprotection. Two sets of pentasaccharides were obtained by the union of two sialylgalactose N‐phenyl trifluoroacetimidate building blocks with the two trisaccharides above. Global deprotection furnished the desired pentasaccharides. The products of these total syntheses are currently employed on the surface of carbohydrate microarrays to detect and type different strains of the influenza virus.     

Total synthesis and biological evaluation of (-)apicularen A and analogues thereof

Apicularen A (1) and related benzolactone acylenamines belong to a growing class of novel natural products possessing highly cytotoxic properties. The challenging structure of 1 includes a 10-membered macrolactone ring, a tetrahydropyran system, an o,m-substituted phenol and a doubly unsaturated acyl group attached on the side chain enamine functionality. The total synthesis of apicularen A described herein involves a strategy equivalent to its proposed biosynthesis and entails a reiterative two-step procedure featuring allylation and ozonolytic cleavage to grow the molecule's chain by one acetate unit at a time. The developed synthetic technology was applied to the construction of a series of apicularen A analogues whose biological evaluation established a set of structure-activity relationships in this new area of potential importance in cancer chemotherapy.     

Synthesis and Crystal Structure of 2-Amino-4- chloro-5-（4-methylbenzyl）-6-methylpyrimidine

The title compound 2-amino-4-chloro-5-(4-methylbenzyl)-6-methylpyrimidine (C26H28Cl2N6, Mr = 495.44) has been synthesized and its crystal structure was determined by single-crystal X-ray diffraction analysis. The crystal belongs to monoclinic, space group P21/c with a = 14.892(7), b = 6.129(3), c = 14.889(7) , β = 109.795(8)°, V = 1278.7(10) 3, Z = 2, F(000) = 520, Dc = 1.287 g/cm3, μ = 0.280 mm-1, the final R = 0.0577 and wR = 0.1589 for 1357 observed reflections with I > 2σ(I). A total of 6091 reflections were collected, of which 2257 were independent (Rint = 0.033). The X-ray analysis reveals that the chlorine atom and methyl of the title compound are disordered.     

1－甲基－2－甲氧羰基－4－氨基吡咯盐酸盐的合成

以1－甲基吡咯为原料，通过酰化、硝化、酯化、还原、成盐等五步反应，合 成得到1－甲基－2－甲氧羰基－4－氨基吡咯盐酸盐，总产率20％左右。该法具有 原料便宜易得、操作简单、产物易于分离提纯等优点，有利于该化合物的大量制备 和应用。